HDMI HDBaseT Transmitter with Dual Output (4K@100m) (HDBaseT Class A)
ATEN VE814AT is an HDBaseT Video Transmitter that is capable of sending HDMI signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable. Featuring dual synchronous outputs the VE814AT can transmit video signal to two remote displays and one at the local side. This HDCP 2.2-compliant transmitter meets the HDMI Specification including 3D Deep Color the maximum data rate of (10.2 Gbps) and 4K video quality up to 100 m.
The VE814AT supports RS-232 and IR signaling pass-through allowing you to control the HDMI source device from the remote unit (VE814AR) while granting access to the HDMI display device from the local unit (VE8014AT). In addition it supports Long Reach Mode that extends HDMI signals up to 150 m 1080p via a single Cat 5e/6 cable.
The VE814AT is a powerful solution for where digital signage is required such as bars educational spaces and public transportation stations allowing display of identical contents at different spots.
| Video Input |
| Interfaces |
1 x HDMI Type A Female (Black) |
| Impedance |
100 Ώ |
| Max. Distance |
1.8 m |
| Video Output |
| Interfaces |
1 x HDMI Type A Female (Black) |
| Impedance |
100 Ώ |
| Video |
| Max. Data Rate |
10.2Gbps (3.4Gbps per lane) |
| Max. Pixel Clock |
340 MHz |
| Compliance |
HDMI (3D Deep Color 4K)
HDCP Compatible
Consumer Electronics Control (CEC) |
| Max. Resolutions / Distance |
Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat 5e/6/6a)
*4K supported:
4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4) |
| Audio |
| Input |
1 x HDMI Type A Female (Black) |
| Output |
1 x HDMI Type A Female (Black) |
| Connectors |
| Unit To Unit |
1 x RJ-45 Female |
| Power |
1 x DC Jack (Black) with locking |
| Control |
| RS-232 |
Connector: 1 x Terminal Block 3 pole
Baud Rate: 19200 Data Bits:8
Stop Bits:1 no parity and flow control |
| IR |
2 x Mini Stereo Jack Female (Black) |
| Ethernet |
1 x RJ-45 Female |
| Switches |
| Long Reach Mode Switch |
1 x Slide Switch - ON/OFF |
| Firmware Upgrade |
1 x Slide Switch - ON/OFF |
| Power Consumption |
DC5V:5.09W:24BTU |
| Environmental |
| Operating Temperature |
0 - 40°C |
| Storage Temperature |
-20 - 60°C |
| Humidity |
0 - 80% RH Non-Condensing |
| Physical Properties |
| Housing |
Metal |
| Weight |
0.45 kg ( 0.99 lb ) |
| Dimensions (L x W x H) with bracket |
14.02 x 12.30 x 3.00 cm
(5.52 x 4.84 x 1.18 in.) |
| Dimensions (L x W x H) without bracket |
13.60 x 10.10 x 2.90 cm
(5.35 x 3.98 x 1.14 in.) |
