The VE883T is a fiber-based transmitter designed to extend uncompressed 4K signal up to 300 m (using VE883TK1) or 10 km (using VE883TK2) over duplex fiber optic cables. The VE883T meets HDMI Specifications including 3D Deep Color (up to 12 bit) and signaling rates (up to 10.2 Gb) to ensure superior video quality. With ATEN’s exclusive FarSmooth technology the VE883T prevents lagging and freezing by matching the output rates to the input rates and ensures the video display is stable smooth and identical to the source particularly in long-distance extension applications where uninterrupted video streams are required. The VE883T features an HDMI input analog audio input USB2.0 IR RS-232 control port and a Gigabit Ethernet port. For point-to-point extension the VE883T can receive fiber optic cables by inserting SFP+ modules to its optic port.
To avoid bulky cable setup the VE883T guarantees a simple and fast solution for optimum transmission of Ethernet IR HDMI RS-232 and USB signals up to 10 km simply via a set of duplex optic fiber. The VE883T is also USB transparent making it compatible with a wide range of USB peripherals.
Engineered to meet the latest trend of lossless 4K and long distance signal extension VE883T is suitable for where long distance transmission is a must and little interference is allowed such as in traffic station and modern office buildings.
Video Input |
Interfaces |
1 x HDMI Type A Female (Black) |
Impedance |
100 Ώ |
Max. Distance |
Up to 5 m |
Video |
Max. Data Rate |
10.2 Gbps (3.4 Gbps Per Lane) |
Max. Pixel Clock |
340 MHz |
Compliance |
HDMI (3D Deep Color 4K) HDCP 2.2 Compatible |
Max. Resolution |
4096x2160/3840x2160@60Hz (4:2:0); 4096x2160/3840x2160@30Hz (4:4:4) |
Max. Distance |
1 x SFP Module (*Note) VE883TK1: up to 300m (MM OM3 Black) VE883TK2: up to 10km (SM Blue) |
Audio |
Input |
1 x Terminal Block 5 pole (Green) |
Output |
N/A |
Connectors |
Unit To Unit |
1 x bi-directional SFP (LC) |
Firmware Upgrade |
1 x Micro USB (Type B) Female (Black) |
Power |
1 x DC Jack with locking |
Fiber Optics |
Data Rate |
10.3 Gbps |
Wavelength |
VE883TK1: 850 nm VE883TK2: 1310 nm |
Fiber Type |
VE883TK1: Multimode(MM) OM3 LC Duplex Type VE883TK2: Singlemode(SM) LC Duplex Type |
Control |
USB Channel |
1 x USB Type B Female (White) |
RS-232 Channel |
1 x Terminal Block 3 pole (Green) |
IR Channel |
1 x Mini Stereo Jack Female (Black); 30~56 KHz full range transmission |
Ethernet Channel |
1 x RJ45 Female |
LEDs |
Power |
1 (Green) |
Link |
1 (Orange) |
Video Output |
N/A |
Power Consumption |
DC5V:7.05W:33BTU |
Environmental |
Operating Temperature |
0-40°C |
Storage Temperature |
-20 - 60°C |
Humidity |
0 - 80% RH Non-Condensing |
Physical Properties |
Housing |
Metal |
Weight |
0.64 kg ( 1.41 lb ) |
Dimensions (L x W x H) with bracket |
19.94 x 14.69 x 3.00 cm (7.85 x 5.78 x 1.18 in.) |
Dimensions (L x W x H) without bracket |
16.60 x 12.49 x 2.90 cm (6.54 x 4.92 x 1.14 in.) |
Carton Lot |
5 pcs |
Note |
1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fiber type bandwidth connector splicing losses modal or chromatic dispersion environmental factors and kinks. 2. It is recommended that you use Single Mode fibers that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifications; Use Multi Mode fibers that conform to IEC 11801 (OM3) specifications. 3. The Device is class 1 laser product. It meet the safety regulations of IEC-60825 FDA 21 CFR 1040.10 and FDA 21 CFR 1040.11. |