4-Port 10G Optical Input Board (4K@300m (K1 MM) / 10km (K2 SM))
The VM7584 4-Port 10G Optical Input Board offers an easy way to route 4 HDMI sources to HDMI displays through optical extenders and up to 16/32 input and 16/32 output connections on an ATEN Modular Matrix Switch through various AV interfaces. Designed with fiber optics technology for long-distance transmission the VM7584 along with its SFP+ modules extends uncompressed 4K signal up to 300 m (using VM7584K1) or 10 km (using VM7584K2) over duplex fiber optic cables. The optical fiber simplifies cabling by guaranteeing an interference-free long-haul transmission of audio video IR and RS-232 control signals over one single set of duplex cables that easily connects to the SFP+ slot. Moreover the VM7584 supports a high data rate of 10.2 Gbps and meets HDMI Specifications that include 3D Deep Color and 4K to ensure superior video quality.
The ATEN VM input/output boards are hot-swappable which gives system integrators great flexibility and efficiency for installation and maintenance. The ATEN VM input/output boards along with ATEN Modular Matrix Switches offer ideal solutions that perfectly meet your demands for scalable video-critical applications.
Diagram
Specifications
| Fiber Optics |
| Data Rate |
10.3 Gbps |
| Wavelength |
VM7584K1: 850 nm
VM7584K2: 1310 nm |
| Fiber Type |
VM7584K1: Multimode(MM) OM3 LC Duplex Type
VM7584K2: Singlemode(SM) LC Duplex Type |
| Video Input |
| Interfaces |
4 x bi-directional SFP (LC) |
| Video |
| Max. Data Rate |
10.2 Gbps (3.4 Gbps per lane) |
| Max. Pixel Clock |
340 MHz |
| Compliance |
HDMI (3D Deep Color 4K)
HDCP 2.2 compatible
Consumer Electronics Control (CEC) |
| Max. Resolution |
Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4) |
| Max. Distance |
VM7584K1: up to 300m (MM OM3 Black)
VM7584K2: up to 10km (SM Blue) |
| Control |
| RS-232 Channel |
4 x Captive Screw Connectors 3 pole |
| IR Channel |
4 x Mini Stereo Jack Female (Black) |
| LEDs |
| Status |
1 (Green) |
| Link |
4 (Orange) |
| Power Consumption |
10.54W:49BTU |
| Environmental |
| Operating Temperature |
0–40°C |
| Storage Temperature |
-20–60°C |
| Humidity |
0 - 80% RH Non-Condensing |
| Physical Properties |
| Housing |
Metal |
| Weight |
0.57 kg ( 1.26 lb ) |
| Dimensions (L x W x H) |
35.20 x 23.80 x 2.33 cm
(13.86 x 9.37 x 0.92 in.) |
| Carton Lot |
2 pcs |
| Note |
1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fiber type bandwidth connector splicing losses modal or chromatic dispersion environmental factors and kinks.
2. It is recommended that you use Single Mode fibers that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifications; Use Multi Mode fibers that conform to IEC 11801 (OM3) specifications.
3. The Board is class 1 laser product. It meet the safety regulations of IEC-60825 FDA 21 CFR 1040.10 and FDA 21 CFR 1040.11. |
